Notice
90% of all Air Tool problems are caused by
moisture in air lines
This problem can be avoided by using Air Tool Lubricant
(See “Lubrication” & “Air Supply” sections of this manual)
FAILURE TO OIL can void your warranty
1 Year Limited Factory Warranty
AIRCAT
®
air tools are warranted to be free from defects in material and workmanship for 2 years from
date of purchase. We will repair or replace at our option any defective part or unit which proves to be
defective in material or workmanship during this 1 year period. The foregoing obligation is AIRCAT‘s sole
liability under this or any implied warranty, and under no circumstances shall it be liable for any
incidental or consequential damages.
This warranty applies to the basic tool. It does not apply to normal wear and tear on attached
accessories/consumable products such as drill chucks, backing pads for sanders, punch and die for
nibblers, air hammer retainers, spray gun cups, or ”kit” accessories, etc.
Naturally, repairs required by abuse, misuse, damage, or repair attempts by anyone other than an
authorized AIRCAT® warranty center are not covered by this warranty. YOU MUST INCLUDE YOUR
ORIGINAL PROOF OF PURCHASE WHEN SENDING TOOL IN FOR REPAIR
Factory Warranty ONLY
Send to: AIRCAT® Pneumatic Tools
230 N. Division Street
Spokane, WA 99202
Or
Authorized AIRCAT® Warranty Repair Center
www.aircat.com/warranty
AIRCAT® and NitroCat® are registered trade marks of Exhaust Technologies, Inc. All patents
are owned by Exhaust Technologies, Inc. exclusively worldwide. * Kevlar™ is a Trademark of the
I
P
n
m
r
n
m
n
Safety
1. Always use impact type sockets that are designed for impact wrenches.
2. Never take any risk with your eyes. Always wear approved eye protection.
3. Have throttle in “off” position when connecting to air supply.
4. Disconnect tool before performing service, changing accessories and when not in
use.
5. Always use tool a safe distance from other people in work area.
6. Maintain tools with care. Keep tools clean and oiled for best and safest
performance.
Follow instructions for lubricating and changing accessories. Wiping or cleaning
rags and other flammable waste materials must be placed in a tightly closed metal
container and disposed of later in the proper fashion.
7. Do not wear loose or ill fitting clothing; remove watches and rings.
8. Use proper hose and fitting. Never use quick change couplings attached at tool.
They add weight and could fail due to vibration. Instead, add a hose whip and
connect coupling between air supply and hose whip, or between hose whip and
leader hose.
9. Don’t overreach. Keep proper footing and balance at all times.
10. Don’t force tool. It will do the job better and safer at the rate of which it was
designed.
11. Don’t abuse hoses or connectors. Never carry tool by the hose or yank it to
disconnect from power supply. Keep hoses from heat, oil, and sharp edges.
Check hoses for weak or worn condition before each use, making certain that all
connections are secure.
Lubrication
Lubricate the tool daily with a good grade of air tool oil. If no air line oiler is used,
run a teaspoon of oil through the tool. Twin clutch mechanism is an oil bath system,
no oil is needed to be put in the clutch housing (nose)2) daily .
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels